ProForm 325 Cse Elliptical Uk Manual - Page 25
HOW TO ADJUST THE DRIVE BELT, See assembly step 17 on and assembly, See EXPLODED DRAWING
View all ProForm 325 Cse Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
HOW TO ADJUST THE DRIVE BELT If you can feel the pedals slip while you are pedaling, even when the resistance is adjusted to the highest level, the drive belt may need to be adjusted. To adjust the drive belt, first unplug the power adapter. Loosen the M8 x 22mm Screw (65), and turn the M10 x 60mm Bolt (62) until the Drive Belt (19) is tight. See assembly step 17 on page 13 and assembly step 16 on page 13. Remove the Left and Right Pedal Arms (11, 12). See EXPLODED DRAWING A on page 30. Using a standard screwdriver, remove the left and right Pedal Discs (15). Next, identify the Left and Right Shields (3, 4). Remove all of the M4 x 16mm Screws (52) from the Left and Right Shields. 65 62 19 Then, remove the two M6 x 18mm Screws (43). Then, remove the Left Shield (3). When the Drive Belt (19) is tight, tighten the M8 x 22mm Screw (65). Then, reattach the parts that you removed. 25