ProForm 325 Cse Elliptical Uk Manual - Page 11

12. Identify the Right Upper Body Arm (8). 12 Slide an Upper Body Arm Cover (42) upward onto the Right Upper Body Arm (8). Next, insert the Right Upper Body Arm (8) into an Upper Body Leg (5). Tip: Have a second person hold the Upper Body Arm Cover (42) while you perform this action: Attach the Right Upper Body Arm (8) to the Upper Body Leg (5) with three M8 x 41mm Bolts (50) and three M8 Jam Nuts (38); start all the Jam Nuts, and then tighten them. Make sure that the Jam Nuts are inside the hexagonal holes (D). Assemble the Left Upper Body Arm (6) and the other Upper Body Leg (5) in the same way. 6 8 D 42 42 38 5 50 38 50 5 13. Insert the Pivot Axle (26) into the Upright (2), and center the Pivot Axle. 13 Using a small plastic bag to keep your fingers clean, apply a generous amount of the included grease to both ends of the Pivot Axle (26). Then, slide a Wave Washer (69) onto each side of the Pivot Axle (26). 69 26 2 Grease 69 11