ProForm 505 Cst Treadmill English Manual - Page 9
Identify the Left Base Cover 88 and the Right
View all ProForm 505 Cst Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. Hold the Left Upright (84) against the Base (95). Insert two 3/8" x 4" Bolts (7) with two 3/8" Star 6 Washers (11) and a 3/8" x 1 1/2" Bolt (14) with a 3/8" Star Washer (11) into the Left Upright. 7 Partially tighten the 3/8" x 4" Bolts (7) until the heads of the Bolts touch the Left Upright (84); 11 do not fully tighten the Bolts yet. Partially tighten the 3/8" x 1 1/2" Bolt (14). With the help of a second person, tip the tread- mill so that the Base (95) is flat on the floor. 95 14 84 11 7. Identify the Left Base Cover (88) and the Right 7 Base Cover (91). Slide the Left Base Cover onto 84 the Left Upright (84). Slide the Right Base Cover onto the Right Upright (85). 88 85 91 8. Slide the Right Upright Cover (86) onto the Right Upright (85). Remove the tie from the 8 bracket on the Right Handrail (83). If necessary, press the 5/16" Cage Nuts (38) back into place. Hold the Right Handrail (83) near the Right Upright (85). Insert the Upright Wire (87) through the bracket on the bottom of the Right Handrail. Pull the Upright Wire out of the end of the Right Handrail. Attach the Right Handrail (83) to the Right Upright (85) with two 5/16" x 1" Flat Head Patch Bolts (3) and a 5/16" x 1" Patch Bolt (4) with a 5/16" Star Washer (13); do not tighten the Patch Bolts yet. Attach the Left Upright Cover (80) and the Left Handrail (82) in the same way. Note: There is no wire on the left side. 87 Bracket 3 83 9 38 4 13 86 85