ProForm 520 Zn Treadmill English Manual
ProForm 520 Zn Treadmill Manual
 |
View all ProForm 520 Zn Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
ProForm 520 Zn Treadmill manual content summary:
- ProForm 520 Zn Treadmill | English Manual - Page 1
www.proform.com Model No. PFTL59112.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care. IMPORTANT: Please register this product (see - ProForm 520 Zn Treadmill | English Manual - Page 2
2 IMPORTANT PRECAUTIONS 3 BEFORE YOU BEGIN 5 PART IDENTIFICATION CHART 6 ASSEMBLY 7 OPERATION AND ADJUSTMENT 13 HOW TO FOLD AND MOVE THE TREADMILL 22 TROUBLESHOOTING 23 EXERCISE GUIDELINES 26 PART LIST 27 EXPLODED DRAWING 28 ORDERING REPLACEMENT PARTS Back Cover LIMITED WARRANTY Back - ProForm 520 Zn Treadmill | English Manual - Page 3
and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See TROUBLESHOOTING on page 23 if the treadmill - ProForm 520 Zn Treadmill | English Manual - Page 4
before clean- ing the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by - ProForm 520 Zn Treadmill | English Manual - Page 5
Thank you for selecting the new PROFORM® 520 ZN treadmill. The 520 ZN treadmill provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. For your benefit, read this manual carefully before you use the treadmill. If you have questions after - ProForm 520 Zn Treadmill | English Manual - Page 6
the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. Note: If a part is not in the hardware kit - ProForm 520 Zn Treadmill | English Manual - Page 7
substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 6. • Assembly requires the following tools: the included hex keys one adjustable wrench - ProForm 520 Zn Treadmill | English Manual - Page 8
2. Identify the Left Upright (75). Have a second person hold the Left Upright near the Base (80). 2 See the inset drawing. Tie the wire tie in the Left Upright (75) securely around the end of the Upright Wire (70). Then, insert the Upright Wire into the lower end of the Left Upright as you - ProForm 520 Zn Treadmill | English Manual - Page 9
4. Identify the Left Handrail (71). Remove the tie from the 5/16" Cage Nut (33). If necessary, 4 press the Cage Nut back into place. Hold the Left Handrail (71) near the Left Upright (75). Insert the Upright Wire (70) through the bracket on the bottom of the Left Handrail. Then, pull the - ProForm 520 Zn Treadmill | English Manual - Page 10
. Remove the wire tie from the Upright Wire (70). Console Wire Console Wire Wire Tie 70 Console Assembly 70 75 7. Insert the Upright Wire (70) into the Left Upright (75) as you set the console assembly on the Left Handrail (71) and the Right Handrail (72). Make sure that no wires are - ProForm 520 Zn Treadmill | English Manual - Page 11
Right Handrail Tube (35) with 8 four #8 x 3/4" Screws (6); start all four Screws, and then tighten them. Do not overtighten the Screws. 35 Console Assembly 34 6 6 9. Identify the Left Tray (87) and the Right Tray (88). Make sure that the indicated notch is 9 positioned as shown. Attach - ProForm 520 Zn Treadmill | English Manual - Page 12
. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 24 and 25). 12 - ProForm 520 Zn Treadmill | English Manual - Page 13
of electric shock. Do not modify the plug-if it will not fit an outlet, have a proper outlet installed by a qualified electrician. If you are unsure whether the treadmill is properly grounded, contact a qualified electrician. Plug the power cord into a surge suppressor, and plug the surge suppressor - ProForm 520 Zn Treadmill | English Manual - Page 14
walking platform, wear clean athletic shoes while using the treadmill. The first time the treadmill is used, observe the alignment of the walking belt, and center the walking belt if necessary (see page 25). The console also features an iFit mode that enables Note: The console can display speed - ProForm 520 Zn Treadmill | English Manual - Page 15
the key into the console. See HOW TO TURN ON THE POWER above. 2. Select the manual mode. If you are not connected to iFit, the manual mode will be selected automatically. If the iFit menu appears, press the Speed decrease button once to select the manual mode. 3. Start the walking belt. To - ProForm 520 Zn Treadmill | English Manual - Page 16
workout. A new segment will appear a wireless iFit module is belt is stopped, the fan will turn off automatically after a few minutes. 8. When you are finished exercising, remove the key from the console. Step onto the foot rails, press the Stop button, and adjust the incline of the treadmill - ProForm 520 Zn Treadmill | English Manual - Page 17
as your weight. In addition, if you manually change the speed or incline of the treadmill during the workout, the number of calories you flashes in the display and the last segment ends. The walking belt will then slow to a stop. If the speed or the key from the console. See step 8 on page 16. 17 - ProForm 520 Zn Treadmill | English Manual - Page 18
Insert the key into the console. The workout will continue until you reach the goal that you set. The walking belt will then moment after you press the button, the walking belt will begin to move. Hold the handrails and remove the key from the console. See step 8 on page 16. The - ProForm 520 Zn Treadmill | English Manual - Page 19
and press one of the iFit buttons. 1. Insert the key into the console. 5. Start the workout. See HOW TO TURN ON THE POWER on page 15. 2. Insert the iFit module into the console. To insert the iFit module, see the instructions included with the iFit module. IMPORTANT: To satisfy exposure - ProForm 520 Zn Treadmill | English Manual - Page 20
page 16. 9. When you are finished exercising, remove the key from the console. To play music or audio books through the iFit mode, go to www.iFit.com. THE COOL-DOWN MODE To select the cool-down mode, press the Cool Down button. The treadmill will adjust to the lowest incline, and the walking belt - ProForm 520 Zn Treadmill | English Manual - Page 21
belt has moved. The lower section of the display will show the status of an iFit module. If an iFit key into the console or when you press the Home button. Press the Enter button repeatedly to select the manual main screen or the iFit designed to be used if the treadmill is displayed in a store. - ProForm 520 Zn Treadmill | English Manual - Page 22
, adjust the incline to the lowest position before you fold the treadmill. Then, remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow below - ProForm 520 Zn Treadmill | English Manual - Page 23
TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. SYMPTOM: The power does not turn on b. Make sure that the power cord is - ProForm 520 Zn Treadmill | English Manual - Page 24
remove the key from the console. SYMPTOM: The walking belt slows when treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform unless instructed to do so by an authorized service - ProForm 520 Zn Treadmill | English Manual - Page 25
of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered. a b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the hex - ProForm 520 Zn Treadmill | English Manual - Page 26
over age 35 or persons with pre-existing health problems. The heart rate monitor is not a medical device proper intensity is the key to achieving results. You can use your heart rate as a guide to find the key to success is to make exercise a regular and enjoyable part of your everyday life. 26 - ProForm 520 Zn Treadmill | English Manual - Page 27
iFit Belt Belt Guide Rubber Spacer Drive Roller/Pulley Magnet Reed Switch Clamp Drive Motor Belt Drive Motor Frame Spacer Frame Key Manual Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts - ProForm 520 Zn Treadmill | English Manual - Page 28
EXPLODED DRAWING A 36 24 24 37 42 28 41 19 19 24 46 45 19 95 1 47 44 16 27 48 29 43 23 48 27 32 28 38 19 25 19 19 29 39 19 14 56 40 25 49 16 42 50 28 19 29 41 19 24 24 3 24 19 36 53 14 19 13 19 19 29 19 52 51 19 12 Model No. PFTL59112.0 R0812A - ProForm 520 Zn Treadmill | English Manual - Page 29
EXPLODED DRAWING B Model No. PFTL59112.0 R0812A 6 6 6 58 3 59 17 20 30 57 3 58 20 22 21 17 60 21 94 1 61 18 6 6 6 6 68 6 62 6 18 63 64 18 65 66 6 6 67 1 6 29 - ProForm 520 Zn Treadmill | English Manual - Page 30
EXPLODED DRAWING C Model No. PFTL59112.0 R0812A 9 69 71 33 8 73 7 7 8 70 8 7 74 6 34 6 9 74 6 35 6 4 2 81 77 3 79 96 75 73 72 8 7 7 8 69 33 7 8 5 78 15 77 1 85 67 79 96 80 81 3 77 2 79 96 30 76 15 77 78 85 79 96 5 4 5 4 - ProForm 520 Zn Treadmill | English Manual - Page 31
EXPLODED DRAWING D 92 55 87 97 97 97 6 6 97 84 6 26 94 83 6 94 94 31 94 86 90 6 6 1 89 6 11 6 Model No. PFTL59112.0 R0812A 10 93 6 6 97 6 84 54 97 6 94 91 97 97 97 94 6 6 6 88 6 82 6 6 6 31 - ProForm 520 Zn Treadmill | English Manual - Page 32
model number and serial number of the product (see the front cover of this manual) • the name of the product (see the front cover of this manual) • the key number and description of the replacement part(s) (see the PART use, or costs of removal or installation; or other consequential damages of any
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
USER’S MANUAL
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Model No. PFTL59112.0
Serial No.
Write the serial number in the space
above for reference.
QUESTIONS?
If you have questions, or if parts
are damaged or missing,
DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer
Care.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri., 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.proformservice.com
www.proform.com
Serial Number
Decal