ProForm 520 Zn Treadmill English Manual - Page 10

6. With the help of a second person, hold the console assembly near the Left Upright (75). 6 Connect the Upright Wire (70) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire (70). Console Wire Console Wire Wire Tie 70 Console Assembly 70 75 7. Insert the Upright Wire (70) into the Left Upright (75) as you set the console assembly on the Left Handrail (71) and the Right Handrail (72). Make sure that no wires are pinched. Attach the console assembly to the Left and Right Handrails (71, 72) with two 5/16" x 1" Bolts (7) and two 5/16" Star Washers (8); start both Bolts, and then tighten them. 7 70 71 8 7 Console Assembly 75 72 8 7 10