ProForm 520 Zn Treadmill English Manual - Page 8
Upright Wire 70. Then, insert the Upright Wire
View all ProForm 520 Zn Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2. Identify the Left Upright (75). Have a second person hold the Left Upright near the Base (80). 2 See the inset drawing. Tie the wire tie in the Left Upright (75) securely around the end of the Upright Wire (70). Then, insert the Upright Wire into the lower end of the Left Upright as you pull the other end of the wire tie upward through the Left Upright. Wire Tie 70 75 75 70 Wire Tie 3. Hold the Left Upright (75) against the Base (80). Be careful not to pinch the Upright Wire (70). 3 Partially tighten three 3/8" x 3 1/2" Screws (4) with three 3/8" Star Washers (5) into the Left Upright and the Base; do not fully tighten the Screws yet. Attach the Right Upright (not shown) in the same way. Note: There are no wires on the right side. 80 75 5 4 5 70 80 8