ProForm 645 Treadmill English Manual - Page 10
the Console Screws.
View all ProForm 645 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
11.Lower the Uprights (70, 76) as shown. Start the two indicated Console Screws (67) into the Left and Right Uprights (70, 76) and the console assembly. If necessary, pull back on the console assembly slightly to align the holes in the Uprights with those on the console assembly. Start the other two Console Screws before tightening all four; do not overtighten the Console Screws. 11 Console Assembly Start First 67 Start First 67 70 76 12. See the inset drawing. Push the Uprights (70, 76) sideways so that the treadmill Frame (26) is 12 centered between the Uprights. Firmly tighten the Upright Bolts (84, 85) on each side of the treadmill. With the help of a second person, carefully raise the Left Upright (70) and the Right Upright (76) to a vertical position 70 Side View 70, 76 85 84 26 View From Above 26 76 13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the large hex key is used to adjust the walking belt (see page 23). 10