ProForm 8.0 Zt Treadmill English Manual - Page 12

13. Slide the Right Upright Cover (110) up against the Right Handrail (101). Attach the Right 13 Upright Cover with two M4 x 16mm Screws (37). Do not overtighten the Screws. Attach the Left Upright Cover (not shown) as described above. See steps 5 and 7. Tighten the two M10 x 95mm Patch Bolts (8) and the two M10 x 68mm Patch Bolts (114). 101 110 37 14. Raise the Frame (56) to the position shown. Have a second person hold the Frame until 14 this step is completed. Orient the Storage Latch (60) so that the large barrel and the Latch Knob (61) are in the posi- 56 tions shown. Attach the upper end of the Storage Latch (60) 7 to the Frame (56) with a 3/8" x 1 3/4" Patch Bolt 6 (7) and a 3/8" Locknut (6). Attach the lower end of the Storage Latch (60) to the Base (95) with a 3/8" x 1 3/4" Patch Bolt (7). Note: It may be necessary to move the Frame (56) back and forth to align the Storage Latch with the Base. Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 21). 61 60 Large Barrel 95 7 15. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 23 and 24). 12