ProForm 8.0 Zt Treadmill English Manual - Page 9

6. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Remove the M10 x 50mm Bolt (31), the M10 Nut (19), and the shipping bracket (A) from the Base (95). Attach a Wheel (97) with the Bolt and the Nut that you just removed. Do not overtighten the Nut; the Wheel must turn freely. Discard the shipping bracket. Press a Base Cap (87) into the Base (95). 6 87 31 56 95 97 A 19 7. With the help of a second person, hold a Bolt Spacer (90) inside the lower end of the Left Upright (85). Insert an M10 x 95mm Patch Bolt (8) with an M10 Star Washer (9) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (90), M10 x 68mm Patch Bolt (114), and M10 Star Washer (9). Hold the Left Upright Spacer (86) and the Left Upright (85) against the Base (95). Tighten the M10 x 95mm Patch Bolt (8) and the M10 x 68mm Patch Bolt (114) until the heads of the Patch Bolts touch the Left Upright; do not fully tighten the Patch Bolts yet. With the help of a second person, tip the treadmill so that the Base (95) is flat on the floor. 7 90 114 9 86 95 8 85 8. Identify the Left and Right Upright Covers (109, 110). Slide the Left Upright Cover onto the Left 8 Upright (85) as shown. Slide the Right Upright Cover onto the Right Upright (89) as shown. 109 85 89 110 9