ProForm 8.5 Zt Treadmill English Manual - Page 11

9. Have a second person hold the console assembly near the Right Upright (80) and the Left Upright (not shown). Connect the Upright Wire (79) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Then, remove the wire tie from the Upright Wire. Set the console assembly on the Right Upright (80) and the Left Upright (not shown). Be careful not to pinch the wires. 9 Console Assembly Console Wire 80 79 Wire Tie Console Wire 79 10. Attach the console assembly with six 5/16" x 1" Bolts (6) and four 5/16" Star Washers (13) (only 10 one side is shown). See steps 4 and 6. Tighten the 3/8" x 4" Bolts (9). Console Assembly 6 13 13 6 11