ProForm 8.5 Zt Treadmill English Manual - Page 8

3. Identify the Right Upright (80) and the Right Upright Spacer (82), which are marked with "Right" stickers. Insert the Upright Wire (79) through the Right Upright Spacer (82) as shown. Set the Right Upright Spacer on the Base (87). Have a second person hold the Right Upright (80) near the Base (87). See the inset drawing. Tie the wire tie in the Right Upright securely around the end of the Upright Wire (79). Then, pull the other end of the wire tie until the Upright Wire is routed completely through the Right Upright. 3 79 Wire Tie 80 79 Wire Tie 4. Hold a Bolt Spacer (81) inside the lower end of the Right Upright (80). Insert a 3/8" x 4" Bolt (9) 4 with a 3/8" Star Washer (12) into the Right Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (81), 3/8" x 4" Bolt 80 (9), and 3/8" Star Washer (12). Hold the Right Upright (80) against the Right Upright Spacer (82). Be careful not to pinch the Upright Wire (79). Tighten the 3/8" x 4" Bolts (9) until the heads of the Bolts touch the Upright; do not fully tighten the Bolts yet. 80 79 82 87 9 12 79 81 81 82 8