ProForm 8.5 Zt Treadmill English Manual - Page 7
Do not over, tighten the Nut; the Wheel must turn freely., Make sure that the power cord is
View all ProForm 8.5 Zt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1. Make sure that the power cord is unplugged. 1 With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (51) so that the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the indicated bolts (A) and the shipping bracket (B). Cut the shipping tie securing the Upright Wire (79) to the Base (87). Locate the plastic tie in the indicated hole in the Base, and use the tie to pull the Upright Wire out of the hole. Attach two Base Feet (84) to the Base (87) in the locations shown with two Base Foot Spacers (89) and two #8 x 1" Tek Screws (4). Then, attach the other two Base Feet (84) with two #8 x 1" Tek Screws (4). B A Hole 79 87 84 4 89 51 84 4 84 4 84 89 4 2. Attach a Wheel (88) to the Base (87) with a 3/8" x 2" Bolt (7) and a 3/8" Nut (11). Do not over- 2 tighten the Nut; the Wheel must turn freely. 83 Press a Base Cap (83) into the Base (87). 7 87 88 11 7