ProForm Endurance 2000 Instruction Manual - Page 34

SYMPTOM: The displays of the console do not, function properly, IMPORTANT: Doing this will erase all

Get ProForm Endurance 2000 PDF manuals and user guides View all ProForm Endurance 2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

SYMPTOM: The displays of the console do not function properly a a. If the console does not boot up properly, or if the console freezes and does not respond, reset the console to the factory default settings. IMPORTANT: Doing this will erase all the custom settings you have made to the console. Resetting the console requires two people. First, press the power switch into the off position. Next, locate the small reset opening (E) on the console. Using a bent paper clip (F), press and hold the reset button inside the opening, and have a second person press the power switch into the on position. Continue holding the reset button until the console turns on. When the reset operation is complete, the console will turn off and then turn back on. If it does not, use the power switch to turn the treadmill off and then on again. Once the console turns on, check for firmware updates (see HOW TO USE THE MAINTENANCE SECTION on page 27). Note: It may take a few minutes for the console to be ready for use. E F 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
34
SYMPTOM: The displays of the console do not
function properly
a.
If the console does not boot up properly, or
if the console freezes and does not respond,
reset the console to the factory default settings.
IMPORTANT: Doing this will erase all the
custom settings you have made to the console.
Resetting the console requires two people. First,
press the power switch into the off position. Next,
locate the small reset opening (E) on the console.
Using a bent paper clip (F), press and hold the
reset button inside the opening, and have a second
person press the power switch into the on position.
Continue holding the reset button until the console
turns on. When the reset operation is complete,
the console will turn off and then turn back on. If it
does not, use the power switch to turn the treadmill
off and then on again. Once the console turns on,
check for firmware updates (see HOW TO USE
THE MAINTENANCE SECTION on page 27).
Note: It may take a few minutes for the console to
be ready for use.
E
F
a