ProForm Endurance 2000 Instruction Manual - Page 9
Then, remove and save the four indicated
View all ProForm Endurance 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4. Hold the Right Upright (84) against the Base (93). Make sure not to pinch the Upright 4 Wire (83). Attach the Right Upright (84) with two 3/8" x 2 3/4" Screws (23), two 3/8" x 1 1/4" 23 Screws (20), and four 3/8" Star Washers (25) as shown; do not fully tighten the Screws yet. 25 Attach the Left Upright (not shown) in the same way. Note: There are no wires on the left 23 side. 5. Identify the Left and Right Upright Covers (89, 90). Slide the Left Upright Cover (89) onto the Left Upright (91), and slide the Right Upright Cover (90) onto the Right Upright (84). Press the Upright Covers downward; do not snap the Upright Covers into place yet. Then, remove and save the four indicated 5/16" x 2" Screws (2). If there is a film (E) covering the decal on each Upright (84, 91), carefully remove the film. 25 83 25 20 84 25 20 5 E 2 91 2 89 93 84 E 90 9