ProForm Fusion 3.0 Xt Bench Uk Manual - Page 11
Insert the Curl Post 7 into the Front Leg 3
View all ProForm Fusion 3.0 Xt Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ATTACHING THE CURL POST Insert the Curl Post (7) into the Front Leg (3) and align the holes in the Front Leg and the Curl Post. Secure the Curl Post with a Curl Knob (24). Make sure that you fully tighten the Curl Knob. STORING THE WEIGHT BENCH To store the weight bench, first lay the Backrest (11) flat (see ADJUSTING THE BACKREST on page 10). Next, remove the indicated Curl Knob (24). Then, lift the Frame (1) to the position shown and tighten the Curl Knob into the indicated hole. Make sure that the Curl Knob is inserted through the Frame. 24 7 3 1 11 Hole 24 11
11
STORING THE WEIGHT BENCH
To store the weight bench, first lay the Backrest (11)
flat (see ADJUSTING THE BACKREST on page
10). Next, remove the indicated Curl Knob (24).
Then, lift the Frame (1) to the position shown and
tighten the Curl Knob into the indicated hole.
Make
sure that the Curl Knob is inserted through the
Frame.
ATTACHING THE CURL POST
Insert the Curl Post (7) into the Front Leg (3) and
align the holes in the Front Leg and the Curl Post.
Secure the Curl Post with a Curl Knob (24).
Make
sure that you fully tighten the Curl Knob.
7
3
24
24
1
11
Hole