ProForm Fusion 3.0 Xt Bench Uk Manual - Page 6
Assembly
View all ProForm Fusion 3.0 Xt Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY Make Assembly Easier Everything in this manual is designed to ensure that the weight bench can be assembled successfully by anyone. However, it is important to realize that the versatile weight bench has many parts and that the assembly process will take time. Most people find that by setting aside plenty of time, assembly will go smoothly. Before beginning assembly, carefully read the following information and instructions: • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • Tighten all parts as you assemble them, unless instructed to do otherwise. • As you assemble the weight bench, make sure all parts are oriented as shown in the drawings. • For help identifying small parts, use the PART IDENTIFICATION CHART. In addition to the included hex key and grease packet, the following tools (not included) are required for assembly: • Two adjustable wrenches • One rubber mallet • One standard screwdriver • One Phillips screwdriver Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. 1. Attach the Front Leg Foot (14) to the Front Leg 1 (3) with an M4 x 16mm Screw (32). 3 2. Attach the Frame (1) to the Front Leg (3) with 2 two M8 x 81mm Button Bolts (47), a Short Support Plate (30), and two M8 Nylon Locknuts (34). Do not tighten the Nylon Locknuts yet. Attach the Bumper (22) to the Frame (1) with two M4 x 16mm Screws (32). 34 30 14 32 47 47 3 1 22 32 6