ProForm Premier 900 Treadmill Uk Manual - Page 10

8. Note: If the treadmill is assembled on a smooth surface, it may roll forward during this step. Raise the Frame (56) to the upright position. IMPORTANT: Do not raise the Frame past the vertical position. Have a second person hold the Frame until step 10 is completed. Orient the Latch Crossbar (38) as shown. Make sure that the "This side toward belt" sticker (F) is facing the treadmill. Attach the Latch Crossbar to the brackets (G) on the Frame (56) with two 5/16" x 3/4" Screws (25) and two 5/16" Star Washers (11). 8 G 11 25 56 F 38 G 11 25 9. Remove the 5/16" Nut (12) and the 5/16" x 1 3/4" Bolt (6) from the bracket on the Base (94). 9 Next, orient the Storage Latch (53) as shown. Attach the lower end of the Storage Latch (53) H to the bracket on the Base (94) with the 5/16" x 1 3/4" Bolt (6) and the 5/16" Nut (12). 53 Then, raise the Storage Latch (53) to a vertical position, and remove the tie (H). 12 94 6 10