ProForm Premier 900 Treadmill Uk Manual - Page 9
firmly tighten the, Screws., Make sure, that the Upright Wire 81 is not pinched., Fully tighten
 |
View all ProForm Premier 900 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. Identify the Left Handrail (86). Attach the Left Handrail (86) to the Left Upright (89) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washers (11); firmly tighten the Screws. Insert the Upright Wire (81) through the hole in the bottom of the Right Handrail (87) as shown. Next, attach the Right Handrail (87) to the Right Upright (90) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washers (11). Make sure that the Upright Wire (81) is not pinched. Fully tighten the Screws. Then, remove the wire tie (A) from the Upright Wire (81). 6 28 11 86 28 89 11 81 87 A 90 7. If there are four screws (E) in the locations shown, remove and discard them. 7 E E 9
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
 |
 |
9
6.
Identify the Left Handrail (86).
Attach the Left Handrail (86) to the Left Upright
(89) with two 5/16" x 2 1/2" Screws (28) and
two 5/16" Star Washers (11);
firmly tighten the
Screws.
Insert the Upright Wire (81) through the hole in
the bottom of the Right Handrail (87) as shown.
Next, attach the Right Handrail (87) to the Right
Upright (90) with two 5/16" x 2 1/2" Screws (28)
and two 5/16" Star Washers (11).
Make sure
that the Upright Wire (81) is not pinched.
Fully tighten the Screws.
Then, remove the wire tie (A) from the Upright
Wire (81).
90
A
6
87
86
89
81
11
28
11
28
7.
If there are four screws (E) in the locations
shown, remove and discard them.
7
E
E