ProForm Xp400r Bike Canadian English Manual - Page 12
IMPORTANT: Tighten both
View all ProForm Xp400r Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
13. Plug the Pulse Wire (38) into the Pulse 13 Receptacle (39) in the Frame (1). 38 14. Identify the Right Pedal (44), which is marked with an "R." Using an adjustable wrench, firmly 14 tighten the Right Pedal clockwise into the right side of the Crank (17). Tighten the Left Pedal (not shown) counterclockwise into the left side of the Crank. IMPORTANT: Tighten both Pedals as firmly as possible. After using the exercise cycle for one week, retighten the Pedals. Adjust the strap on the Right Pedal (44) to the desired position, and press the ends of the straps onto the tabs on the Right Pedal. Adjust the strap on the Left Pedal (not shown) in the same way. 1 39 17 Strap 44 Tab 15. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor. 12