ProForm Xp400r Bike Canadian English Manual - Page 9

7. The Console (5) can use four 1.5V "D" batteries (not included); alkaline batteries are recommended. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other electronic components. Remove the battery cover, insert the batteries into the battery compartments, and reattach the battery cover. Make sure to orient the batteries as shown by the diagram inside the battery compartments. To purchase an optional AC adapter, contact the store where you purchased this product or call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturer-supplied AC adapter. Plug one end of the AC adapter into the jack on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. 7 Batteries Battery Cover 5 8. Tip: Avoid pinching the wires during this step. 8 While another person holds the Console (5) near the Upright (4), connect the console wires to the Wire Harness (40). Insert the excess wire downward into the Upright. Attach the Console (5) to the Upright (4) with four M4 x 16mm Screws (62). 5 Avoid pinching the wires 4 62 Console 40 Wires 9