ProForm Xp400r Bike Canadian English Manual - Page 8
Tip: Avoid pinching the Wire Harness 40
View all ProForm Xp400r Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Tip: Avoid pinching the Wire Harness (40) during this step. Have another person hold the Upright (4) and the Top Shield (14) near the Frame (1). Locate the wire tie in the Upright and the Wire Harness (40) in the Frame. See the inset drawing. Tie the wire tie to one of the connectors on the Wire Harness (40). Then, pull the other end of the wire tie upward out of the top of the Upright (4). Discard the wire tie. Slide the Upright (4) onto the Frame (1). Attach the Upright with four M10 x 20mm Patch Screws (54). Then, press the Top Shield (14) downward into the Frame. 5 54 14 4 Wire Tie Wire Tie 40 54 54 40 1 Avoid pinching the Wire Harness (40) 6. Identify the Right and Left Handlebars (28, 29), which are marked with "R" and "L" stickers. 6 Attach each Handlebar (28, 29) to the Upright (4) with two M6 x 38mm Bolts (55) and two M6 Locknuts (56). Make sure that the hexagonal holes are in the indicated location. 4 29 Hexagonal Holes 56 55 28 8