Pyle PA305 Instruction Manual - Page 8
System, speakers, series
View all Pyle PA305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
System 1: Single speaker system 1.Connect the speaker (-) terminal to the amplifier COMMON terminal. 2.Depending on the speaker being used, connect the speaker (+) terminal to the amplifier 4 Ohm, 8 Ohm or 16 Ohm amplifier terminal. THIS EXAMPLE SHOWS A 4 OHM SPEAKER System 2: Two (or more) speakers in series 1.Connect the LEFT SPEAKER (-) to the amplifier COMMON terminal. 2.Connect the LEFT SPEAKER (+) to the RIGHT SPEAKER (-). 3.Connect the RIGHT SPEAKER (+) to the amplifier's 4 Ohm, 8 Ohm or 16 Ohm terminal, depending on the TOTAL IMPEDANCE of the two speakers.If each speaker has an impedance of 8 Ohms,the total speaker impedance in this series configuration is 16 Ohms. NOTE: Additional speakers may be included in series, but it is necessary to calculate total impedance, and connect the speaker circuit to a terminal of appropriate impedance. For example, if three speakers of 4 Ohms are used, total impedance is 12 Ohms-You should connect to the 16 Ohm terminal. 7