Pyle PLD43MU PLD43MU Manual 1 - Page 12

Preparing the Remote Control

Page 12 highlights

Remote Control Preparing the Remote Control Installing The Lithium Coin Battery 1.First push to inside as the direction indicated by the arrow (See 1 )And then Remove the battery holder as the direction indicated by the arrow (See 2 ). 2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ). 3.Insert the battery holder. Push in the holder to the original position(See 4 ). CR2025 Using the Remote Control Face the remote control towards the player front face IR mark (remote control signal receiver), make sure there is no obstacle in between . Operation angle: About 30 degree in each the direction of the front of the IR mark. Warning : Do not install any battery other than CR2025 or its equivalent; otherwise , it may explode . Store the battery in a place where children cannot reach to avoid risk of accident . 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35

Remote Control
11
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver), make sure there is no obstacle in between .
Operation angle: About
30 degree in each the direction of the front of the IR mark.
Preparing the Remote Control
1.First push to inside as the direction indicated by the arrow (See
)And then
Remove the battery holder as the direction indicated by the arrow (See
).
2.Replace the battery Set a new battery property with (+)side up as illustrated
(See
).
3.Insert the battery holder. Push in the holder to the original position(See
).
1
2
3
4
Installing The Lithium Coin Battery
Warning :
Do not install any battery other than CR2025 or its equivalent;
otherwise , it may explode .
Store the battery in a place where children cannot reach to avoid risk
of accident .
CR2025