Pyle PLD43MU PLD43MU Manual 1 - Page 20

Radio Operation Listening to the Radio Switching To Radio Mode MOD Repeatedly Touch the MOD section on the touch screen to select the RADIO mode. (You can press the MOD button on front panel to select the Radio mode .) the following information will appears on the monitor : FM1 87.5 MHZ ST DX DISC-IN SWF POP 123 CH6 11:08 AM MOD 4 5 6 BND Automatic Search During Radio mode, swing and hold (for about 2 seconds )the SELknob in / direction (or touch the / section long) to start search for a radio station automatically . Storing Stations In Memory Setting Memory Press the /CH 1-6 button repeatedly on the front panel to preset stations at radio mode . (Or touch the screen the 1 / 2 / 3 / 4 / 5 / 6 sections) FM1 98.10 MHZ CH6 ST DX DISC-IN SWF POP 123 11:08 AM MOD Selecting The Frequency Band 4 5 6 BND BND Touch the BND section on the touch screen repeatedly to select the band , screen band Touch to preset station will show in turn : With this system, a total of 30 stations ( You can also press the BND on front panel repeatedly to select the band .) FM1 FM2 FM3 can be stored in the memory of six buttons. Each band stores up to six preset stations. The stations might be FM1, FM2, FM3, AM1(MW1), and AM2(MW2) band. AM2(MW2) AM1(MW1) The operation is as below : -Store in Memory Touch and keep the 1-6 sections Start Searching For a Station Manual Search (or press and hold the /CH 1-6) for about 2 seconds, the current listening station will be stored into the Touch briefly the " " section on number location . the screen (or swing briefly the SEL knob in direction) to increase frequency by one step of channel spacing . -Retrieve a preset station Touch the 1-6 sections briefly (or press the /CH1-6 button repeatedly) to retrieve a station which had been stored Touch briefly the " " section on in the memory in advance the chose the screen (or swing briefly the number is shown on display . SEL knob in direction) to decrease frequency by one step of channel spacing . 19