Pyle PLD43MU PLD43MU Manual 1 - Page 21

Radio Operation Automatic Memory Storing & Program Scanning Automatic Preset Setup APS In Radio Mode, Touch the APS section and keep on the touch screen(or swing the SEL knob in direction of the APS/DISP) for about 2 seconds to active automatic station storage. The radio searches within the current frequency band, e.g. FM1, for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set . Mono/Stereo Function ST In Radio mode, touch the ST section on screen (or press MO/ST button on remote ) to select mono or stereo mode. you can sometimes improve reception of distant stations by selecting mono operation . Loud Function LUD Touch the LUD section on the touch screen to switch the LOUND ON or OFF. EQ Function DSP Touch the DSP section repeatedly on the touch screen to select the EQ (pop/rock/jazz/classic/flat) Scan Function APS In Radio mode, touch the APS section or swing the SEL knob briefly in the APS/DISP direction , the radio briefly plays all the preset stations of the frequency band . Select Audio Mode SEL Touch the SEL section repeatedly on the touch screen to select the desired item(volume/bass/treble/ balance/fader) FM1 98.10 MHZ CH6 ST DX DISC-IN SWF POP 123 11:08 AM MOD 4 5 6 BND Select BG Color Function SEL Touch the SEL section briefly on the touch screen to select the "BG Color" by touching repeatedly the SEL knob , then touch the VOL+/- (or rotate the VOL+/- on the front panel) to select your desired Background Color . Touch it to select the other item . Rock 03 Mute Function Use your finger touch the " " section , it will mute the sound but the disc continues playing. Touch it again to resume . SWF LUD DSP CLK APS ST VOLUME- SEL VOLUME+ Buzzer Function Touch the SEL section on touch SEL screen repeatedly to switch the Buzzer ON or OFF by using the VOL+/- . 20