Pyle PLDVRCAMAND75 Instruction Manual - Page 4

MATTERS NEEDING ATTENTION 1. When you turn on your navigation device, the GPS receiver must collect satellite data and establish the current location. The time required to acquire satellite signals varies based on several factors, including how far you are from the location where you last used your navigation device, whether you have a clear view of the sky, and how long it has been since you last used your navigation device. The first time you turn on your navigation device, it may take several minutes to acquire satellite signals. • Turn on the device. • Wait while the device locates satellites. • If necessary, go to an open area away from tall buildings and trees. 2. When the product is located in the building, tunnel or around a tall barrier, the system will be temporarily unable to provide you with the positioning and navigation services. Generally, it takes at least 4 satellite signals bars to complete the GPS positioning. If the weather is not good or have dense obstacles, in a building this may affect the reception of satellite signals. 3. Due to traffic or construction, navigation of electronic map data and actual traffic directions may appear. In all cases, you must follow the road status, site signs and other traffic rules. The company does not assume any responsibility of traffic accidents and other various losses due to the misuse of the product. 4. Do not the use this product outside of the power line standard. Do not bend or squeeze power line by heavy force, to avoid short circuit, fire or other accidents. 5. Software upgrades or update may cause may result to some interface, functions and specifications change without notice. 6. This manual has been carefully checked, but does not rule out the possibility of undiscovered errors. Please contact department of the company for any notice. 7. The picture in this manual is for reference only. www.PyleUSA.com 3 www.PyleUSA.com