RCA RCRPS04GR Owner/User Manual - Page 20

TIPS: All TV codes start with the number 1; all VCR and DVR codes start with the number 2; all DVD player codes, the number 3; all audio device codes, the number 4; and all satellite receiver, cable box, and digital TV converters, the number 5. To exit the Code Retrieval Mode at any time, press the EXIT•BACK key. If you press an invalid key during the Code Retrieval process, the remote will not respond. If you do not press a valid Code Retrieval key (TV, SAT•CBL•STREAM, DVD•VCR, AUDIO•AUX, INFO, EXIT•BACK), Code Retrieval times out after 15 seconds. The POWER key blinks four times, and then turns off. 1. Press and hold the device key (TV, SAT•CBL•STREAM, DVD•VCR, or AUDIO•AUX) whose code you wish to retrieve. The POWER key illuminates. Keep pressing the device key. 2. While holding the device key down, press and hold the P key. The POWER key illumination turns off. After holding down both keys for three seconds, it turns back on. 3. Release both keys. The POWER key remains illuminated. 4. Starting with the number 1 key, press and release each number key on the keypad in the following order: 1-9, then 0. The number that causes the POWER key to blink is the first number of the code. As you find each number of the code, write it down for future reference. Then start with the number 1 key again. 5. Repeat step 4 until you have retrieved all five numbers in the code. After the fifth number is retrieved, the POWER key blinks briefly, then turns off. TV CODE 1 DVD•VCR CODE DVD DVR/VCR SAT•CBL•STREAM CODE 5 AUDIO•AUX CODE DVD TV SAT/CBL AUDIO DVR/VCR 20