RCA RS2302 User Guide - Page 10

Sound Features Volume Control Turn VOLUME on the main unit or press VOL or on the remote control to adjust volume level. Using Preset Equalizer Curves Press EQ to toggle among FLAT, ROCK, POP, JAZZ, CLASS and CUSTOM. The display shows the selection briefly. EN X-Bass Press X-BASS to turn on/off boosting the bass frequency. Creating a Custom Curve 1. Press EQ to select CUSTOM mode. 2. While CUSTOM is displayed, press SKIP BACKWARD or SKIP FORWARD on the main unit or PRESET or PRESET on the remote control to cycle among displayed bassand treble - range levels. 3. While BAS or TRE is displayed, adjust VOLUME to set the associated gain between -10 - +10. Muting Audio Press MUTE on the remote to cut the sound. (Remote Only) CD Player CD-R / RW Loading Discs This unit is compatible with CD-RW/ CD-R discs for playback. 1. Press SOURCE repeatedly on the main unit or CD on the remote control to select CD mode. 2. Press OPEN/CLOSE on the front panel of the main unit or on the remote control to open disc compartment. 3. Insert up to 5 discs with label face up. 4. Press OPEN/CLOSE on the front panel of the main unit or on the remote control again to close disc compartment. The disc that is loaded and ready to play is the icon that is flashing on the display. Notes on CD-R/RW Disc: • Do not affix any type of labels to either side (recordable or labeled side) of a CD-R/RW disc as this may result in the unit malfunctioning. • To avoid damages to the CD-R/RW disc, do not open the disc compartment door while the disc is being read. • Do not load an unrecorded CD-R/RW disc into the unit. This may take a longer time to read the disc. • Playback capability for CD-RW discs may vary due to variations in the quality of the CD-RW disc and the recorder used to create the disc. Play and Pause Discs • Press PLAY/PAUSE in stop mode to begin playback. • Press PLAY/PAUSE during playback to to pause disc.Press again to resume. Note: Be sure to remove all discs from the disc compartment before moving or transporting the unit! Play and load simultaneously by: 1. Press OPEN/CLOSE on the front panel of the main unit or on the remote control to open the tray while a CD is playing. 2. Load/change discs for available trays. 3. Press OPEN/CLOSE on the front panel of the main unit or on the remote control to close the tray. 7