RCA RS2302 User Guide - Page 12

Radio Selecting Tuner Band 1. Press SOURCE on the main unit or TUNER on the remote control to enter Tuner mode. 2. Press CD INFO/BAND to select between AM or FM Radio band. Auto Preset Programming Press and hold CD INFO/BAND button for 2 seconds to scan stations in FM and AM band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button. You can stop the automatic scan by pressing any button, but the erased stations cannot be recovered. EN Tip: Your audio system has 32 preset stations. Tuning to a Station Press SKIP BACKWARD / SKIP FORWARD on the main unit or TUNING or on the remote control to select frequency. Manually Setting Presets 1. Press SKIP BACKWARD / SKIP FORWARD to access the desired frequency. 2. Press the PROG/SET button once. 3. The most recently accessed program location will flash on the display. 4. If a different program location is preferred, press SKIP BACKWARD or SKIP FORWARD on the main unit or PRESET or on the remote control to move to the desired preset number (1-32). 5. Press PROG/SET to store the selected frequency at that preset. Using Presets The tuner can be in either TUNE or PRESET mode. When in preset mode, • Press TUNE/PRESET on the main system or PRESET or on the remote control to access the previous or next preset station. • The display first shows the preset program number and after a few seconds, the preset program and frequency will be displayed. PR 01 FM Suppressing Stereo Signal PROG 07 87.90 MHz Press ST/MONO on the main unit or FM ST. on the remote control to toggle between FM mono and stereo for stereo FM stations. 9