RCA RS2302 User Guide - Page 14

Troubleshooting Tips Problem Solution System will • Check power cord for a secure not turn on connection. • Unplug the unit for a moment, and then plug into power source again. • Check the outlet by plugging in another device. No sound • Increase the volume setting. • Check connection to speakers. • Check that you have selected the appropriate function: CD, TAPE, Tuner. • Make sure mute is off. • Make sure headphones are not plugged in. • Check antenna connection. • Move antenna. • Turn off nearby electrical appliances, such as hair dryer, vacuum cleaner, microwave, fluorescent lights. Problem Solution CD button will not respond, or does not change discs when you press DISC SKIP • Switch to another function (TAPE, Tuner) and then back to CD. • Unplug the unit for a moment and then plug it back into the power source. EN Distorted or • Inspect the tape head, clean it if noisy tape necessary. recordings Remote control does not work • Check that the batteries are properly installed. • Replace weak batteries. • Check the system is plugged into power source. • Point the remote directly at the system's front panel. • Move closer to the system. • Remove any obstacles between the remote and the system. Poor radio reception CD does not • Check that CD is in the tray. play • Check that CD label is facing up. • Check that PAUSE mode is not on. • Check that CD function is selected. • Use CD lens cleaner. • Clean the disc. • try another disc. CD sound skips • Clean the disc. • Check disc for warping, scratches, or other damage. • Check if something is causing the system to vibrate. If so, move the system. • Make sure the speakers are at least 3 feet away or on a different surface from the main unit. "ERROR" message • Unplug the unit • See if there is anything obstructing the CD door or preventing it from closing. 11