Radio Shack pro 95 User Guide - Page 27

sure to get a current copy. Also see the supplied Trunking Guide. Follow these steps to store frequencies into channels. Ô 1. Press MANUAL, enter the bank (0-9) and channel number (00-99) where you want to store a frequency, then press MANUAL again. M and the bank and channel number appear at the upper left corner of the display (for example: M000). • Press FUNC. Then press  or . The bank number moves in the direction of the arrow pressed. Ô NOTE Ô • If you are storing frequencies for an EDACS system, you must store them in order, with the first frequency in channel 1 for the current bank. For example, if you want to store frequencies of 150.0100, 150.0200, 150.0300, and 150.0400 MHz, you must store them in Channels 1, 2, 3, and 4 respectively. • When M is on the display, you can also select your desired bank and channel number with the FUNC and arrow keys. • Press FUNC. Then hold down  or . The bank number moves continuously in the assigned direction. • Press . The channel number moves upward one by one. Or, press . The channel number moves downward one by one. 2. Press PGM. M changes to P. 3. Use the number keys and ./DELAY to enter the fre- Operation 27