Radio Shack pro 95 User Guide - Page 33
Band Charts - scanner frequencies
UPC - 040293166847
View all Radio Shack pro 95 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
bank (SR0, SR1, SR2, SR3, SR4, or SR5). 2. In the marine and CB bands, you can directly select a channel or search through the band. When M appears at the left most position of the second line, you can directly select a channel (refer to "Band Charts" on Page 34). Press the desired channel number while M appears to select it. You can also change the channels by pressing or . 3. Press FUNC then SEARCH while M appears. M changes to S and now you can search through the band. Press FUNC then SEARCH again to return to the previous mode. 4. Rotate SQUELCH clockwise and leave it set to a point just after the hissing sound stops. After 2 seconds (if the delay feature is on), the received frequency appears and the scanner starts searching. 5. When the scanner finds an active frequency, it stops searching. 33 Operation