Radio Shack pro 95 User Guide - Page 50
Ttenuator
UPC - 040293166847
View all Radio Shack pro 95 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Special Features might have to change the receive mode. To change the receive mode, repeatedly press MODE. The receive mode changes as follows: AM - accesses the AM mode FM - accesses the FM mode MO - accesses the FM Mode, Motorola Trunking System (with a 4- or 5-digit ID code) ED - accesses the FM Mode, EDACS Trunking System (with 4-digit decimal ID code or 5-digit AFS code) Ô Ô NOTE Ô MO (MOT) and ED modes are not available when the scanner tunes up or down through the frequency ranges in which the trunking operation is not used. USING THE ATTENUATOR To reduce interference or noise caused by strong signals, you can reduce the scanner's sensitivity to these signals. There are two attenuator modes in your scanner. One is normal attenuator mode in which you set the attenuator in each channel or each band/group in the search and tune mode. The other is global mode in which you set the attenuator only once. This setting is applied all the time in every mode. Press ATT to turn on or off the attenuator while the channel number is indicated or while the scanner is searching through bands/groups. When the attenuator is on, A appears at the seventh digit in the top line. 50