Radio Shack pro 95 User Guide - Page 59
frequency. After you confirm
UPC - 040293166847
View all Radio Shack pro 95 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Trunking 1. Press PGM then TRUNK to enter the ID program mode. 2. Press FUNC and press (or hold) or to select the bank. 3. Press MODE and select MOT. 4. Press FUNC then 2. The display indicates Base freq.: on the first line, 406.0000 on the second line, Offset: 380 on the third line and Step: 25.0kHz on the bottom line. 5. While B in Base blinks, if necessary, press the desired Base frequency with the number keys and press ENTER. Confirm the entry. If it is incorrect, press the number keys again to set the base frequency. After you confirm the input, press ENTER again. 6. While O in Offset blinks, if necessary, enter the offset number and press ENTER. Confirm the entry. If it is incorrect, then press the number keys again to set the frequency. After you confirm the input, press ENTER again. 7. While S in Step blinks, repeatedly press or to select the step number, 25.0, 50.0 or 12.5 kHz, then press ENTER. 8. Press PGM to enter the program mode. Store the trunking IDs into the sub-bank in the same bank. 59