Ricoh Aficio GX2500 Support Guide - Page 23

XIX. Service Tables, the following groups: SP4000, SP6000

Get Ricoh Aficio GX2500 PDF manuals and user guides View all Ricoh Aficio GX2500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Product Support Guide MODEL: J015 23 Version 1.1 (01/08/08) XIX. Service Tables There are two service modes for this machine: A. Service Mode. This mode is menu driven and includes important items for some adjustments as well as other important functions such as displaying the firmware version number, clearing the memory, printing reports, and so on. B. Engine Maintenance (SP) Mode. Consists of SP codes SP1000 to SP7532. These are printer engine SP adjustments, primarily but not exclusively used by designers for machine adjustments. 1. Entering/Exiting Service Mode To enter Service Mode: 1. Press and hold [ ] [ ] for 3 sec., release > [#Enter] > "Service Menu". 2. [#Enter]> "Bit Switch" • Bit Switch • Reset Settings • Service Summary • Version Display • Serial No. Edit • Counter Setting • Fax No. (Not Used) • E. Saver Display To Exit the Service Mode 1. Press [Escape]> "Service Menu". 1. [ ] or [ ]> "End"> [#Enter]> Standby These items are available on the Service Menu. • Bit Switch Bit Switch Bit switches 1 to 8. (Described in detail below.) • Reset Settings Initialize System. Clears all SP code settings are restores their default settings. • Service Summary Prints the Service Summary. The service summary lists information about the current status of the machine. • Version Display Displays the version number of the printer engine. Counter Settings Counter Display. Switches the counter display on and off. LevColor Disp. Switches the level counter display on and off. Coverage Count. Switches the coverage counter on and off. Double Count. Switches double counting on and off. Note: The default setting for all theses items is "Off". • Serial No. Edit • Fax No. (Not Used) • E. Saver Display 2. Entering/Exiting SP Mode To enter SP Mode 1. Press and hold [ ] [ ] for 3 sec., release> [#Enter]. SYSTEM Ver. 0.51 Service Menu 2. [ ] or [ ]> "Engine Maint."> [#Enter]. Engine Maint. allows changing the settings of individual SP codes (SP1000 to SP7532. For more about individual SP code settings, refer to the tables in this section. There are no settings available for the following groups: SP4000, SP6000, SP8000, SP9000. To exit SP mode 1. At any level in the SP mode press [No] to return to the first level. SYSTEM Ver. 0.xx Service Menu 2. [ ] or [ ]> "End"> [#Enter]. The machine leaves the SP mode and switches off. 3. Press [Power] to switch the machine on. Information contained in this document can change at anytime.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
Product Support Guide
MODEL:
J015
Version 1.1 (01/08/08)
23
XIX. Service Tables
There are two service modes for this machine:
A
.
Service Mode.
This mode is menu driven and includes important items for some adjustments as well as other
important functions such as displaying the firmware version number, clearing the memory, printing reports, and so
on.
B.
Engine Maintenance (SP) Mode.
Consists of SP codes SP1000 to SP7532. These are printer engine SP
adjustments, primarily but not exclusively used by designers for machine adjustments.
1. Entering/Exiting Service Mode
To enter Service Mode:
1. Press and hold [
S
] [
T
] for 3 sec., release > [#Enter] > "Service Menu".
2. [#Enter]> "Bit Switch"
• Bit Switch
• Reset Settings
• Service Summary
• Version Display
• Serial No. Edit
• Counter Setting
• Fax No. (Not Used)
• E. Saver Display
To Exit the Service Mode
1. Press [Escape]> "Service Menu".
1. [
S
] or [
T
]> "End"> [#Enter]> Standby
These items are available on the Service Menu.
• Bit Switch
Bit Switch Bit switches 1 to 8. (Described in detail below.)
• Reset Settings
Initialize System. Clears all SP code settings are restores their default settings.
• Service Summary
Prints the Service Summary. The service summary lists information about the
current status of the machine.
• Version Display
Displays the version number of the printer engine.
Counter Display. Switches the counter display on and off.
Counter Settings
LevColor Disp. Switches the level counter display on and off.
Coverage Count. Switches the coverage counter on and off.
Double Count. Switches double counting on and off.
Note: The default setting for all theses items is "Off".
• Serial No. Edit
• Fax No. (Not Used)
• E. Saver Display
2. Entering/Exiting SP Mode
To enter SP Mode
1. Press and hold [
S
] [
T
] for 3 sec., release> [#Enter].
SYSTEM Ver. 0.51
Service Menu
2. [
S
] or [
T
]> "Engine Maint."> [#Enter].
Engine Maint. allows changing the settings of individual SP codes (SP1000 to SP7532. For more
about individual SP code settings, refer to the tables in this section. There are no settings available for
the following groups: SP4000, SP6000, SP8000, SP9000.
To exit SP mode
1. At any level in the SP mode press [No] to return to the first level.
SYSTEM Ver. 0.xx
Service Menu
2. [
S
] or [
T
]> "End"> [#Enter].
The machine leaves the SP mode and switches off.
3. Press [Power] to switch the machine on.
Information contained in this document can change at anytime.