Ricoh Aficio SP C320DN Manuals - Page 103
When you select [TLS], you must install IEEE 802.1X Client Certificate.
View all Ricoh Aficio SP C320DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Configuring IEEE 802.1X Certain methods might not be available, depending on the RADIUS server you want to use. • Make the following settings according to the operating system you are using: • Select [On] or [Off] in "Authenticate Server Certificate". • Select [On] or [Off] in "Trust Intermediate Certificate Authority". • Enter the host name of the RADIUS server in "Server ID". • Select [On] or [Off] in "Permit Sub-domain". PEAP • Click [Change] in "Password", and then enter the password set in the RADIUS server. If [TLS] is selected for "Phase 2 Method", you do not need to specify a password. • Click [Change] on "Phase 2 User Name", and then enter the user name set in the RADIUS server. • Select [MSCHAPv2] or [TLS] in "Phase 2 Method". When you select [TLS], you must install "IEEE 802.1X Client Certificate". • Make the following settings according to the operating system you are using: 5 • Select [On] or [Off] in "Authenticate Server Certificate". • Select [On] or [Off] in "Trust Intermediate Certificate Authority". • Enter the host name of the RADIUS server on "Server ID". • Select [On] or [Off] in "Permit Sub-domain". 7. Click [OK]. 8. "Updating..." appears. Wait for about one or two minutes, and then click [OK]. 9. In the menu area, click [Configuration]. 10. Under "Interface", click [Interface Settings]. 11. Select [Active] in "Ethernet Security". 12. Click [OK]. 13. "Updating..." appears. Wait for about one or two minutes, and then click [OK]. 14. Click [Logout]. 15. Quit the Web Image Monitor. • If there is a problem with settings, you might not be able to communicate with the printer. To identify the problem, print a network summary. • If you cannot identify the problem, reset the printer interface to normal, and then repeat the procedure from the beginning. 101