Ricoh Aficio SP C320DN Manuals - Page 105
Select [On] or [Off] in Trust Intermediate Certificate Authority.
View all Ricoh Aficio SP C320DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Configuring IEEE 802.1X • Select [On] or [Off] in "Authenticate Server Certificate". • Select [On] or [Off] in "Trust Intermediate Certificate Authority". • Enter the host name of the RADIUS server on "Server ID". • Select [On] or [Off] in "Permit Sub-domain". 7. Click [OK]. 8. "Updating..." appears. Wait for about one or two minutes, and then click [OK]. 9. In the menu area, click [Configuration]. 10. Under "Interface", click [Wireless LAN Settings]. 11. Select [Wireless LAN] in "LAN Type". 12. Select [Infrastructure Mode] in "Communication Mode". 13. Enter the alphanumeric characters (a-z, A-Z, or 0-9) in [SSID] according to the access point you want to use. 14. Select [WPA] in "Security Method". 5 15. Select [TKIP] or [CCMP (AES)] in "WPA Encryption Method" according to the access point you want to use. 16. Select [WPA] or [WPA2] in "WPA Authentication Method". 17. Click [OK]. 18. "Updating..." appears. Wait for about one or two minutes, and then click [OK]. 19. Click [Logout]. 20. Quit the Web Image Monitor. • If there is a problem with settings, you might not be able to communicate with the printer. To identify the problem, print a network summary. • If you cannot identify the problem, reset the printer interface to normal, and then repeat the procedure from the beginning. 103