Ricoh Aficio SP C320DN Manuals - Page 86
Configuring Network Settings When Using NetWare, Gateway]: Default Gateway
View all Ricoh Aficio SP C320DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
5. Configuration • [Gateway]: Default Gateway 6. Press the [Menu] key to return to the initial screen. 7. Print a configuration page to confirm the settings. • For details about printing the configuration page, see "Test Printing". • p.43 "Test Printing" Configuring Network Settings When Using NetWare To use NetWare, select the appropriate NetWare frame type from the following. 5 • Auto Select • Ethernet II • Ethernet 802.2 • Ethernet 802.3 • Ethernet SNAP • Usually, you can use the default (Auto Select). When you first select [Auto Select], the frame type detected by the printer is adopted. However, if your network can use more than two frame types, the printer may fail to select the correct frame type with [Auto Select] selected. In this case, select the preferred frame type. 1. Press the [Menu] key. 84 CBK049