Ricoh Pro 8100 EX User Guide - Page 973

4. Details of Menu Items in Advanced Settings Press [+] to increase the length of area at the trailing edge to apply the current and [−] to reduce it. Setting Items Max. Value Min. Value Step Unit [Paper Transfer Current; Trail Edge Dist] 30 0 1 mm 33: [Avoid Ppr Trns Shck Jitr: Fed Intvl Adj] Specify whether or not to enable the mode to reduce the jitter*1 produced when paper enters the paper transfer roller. If [On] is selected, the machine adjusts the interval between sheets to reduce jitter. However, the throughput may be reduced when you use paper larger than A4 or 81/2 × 14 . In such a case, select [Off] to improve the throughput. • Jitter does not occur with A4 , 81/2 × 14 or smaller paper. Setting Items [Avoid Ppr Trnsf Shock Jitter: Feed Interval Adj] [On] [Off] Values *1 The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is transmitted to the drum unit via the intermediate transfer belt, causing banding. Fuser Adjustment 34: [Put Pressure before Fusing] Specify whether or not to have the fusing pressure roller come into contact with the fusing belt before the printing operation (paper feeding) starts. If [On] is selected, the fusing pressure roller comes into contact with the fusing belt before the paper is fed, preventing the temperature of the fusing unit from dropping. • If [On] is selected, image degradation (uneven luster) may occur. Setting Items [Put Pressure before Fusing] Values [On] [Off] 102