Ricoh Pro 8100 EX User Guide - Page 976

Setting Values 40: [Reduce Initial CPM: Low Temp. Envrnmt.] Select one of the three levels of initial print speed reduction at low temperatures. The selected initial print speed reduction level in copies-per-minute (CPM) is applied only when printing starts (for approximately 15 to 20 seconds). This helps improve throughput if the fusing temperature can be kept constant. However, the throughput may decrease in an environment in which the temperature varies. • [Do not Reduce] Full speed. • [Reduce Level 1] 80% of full speed. • [Reduce Level 2] 65% of full speed. • [Reduce Level 3] 50% of full speed. • The setting will take effect if the ambient temperature is 17°C (62.6°F) or lower. Since the temperature of the fusing unit may decrease in a cold environment, specify this setting in addition to 41: [Reduce Initl CPM: Norml/High Temp Env]. Setting Items [Reduce Initial CPM: Low Temperature Environment] [Do not Reduce] [Reduce Level 1] [Reduce Level 2] [Reduce Level 3] Values 41: [Reduce Initl CPM: Norml/High Temp Env] Select one of the three levels of initial print speed reduction at normal room temperatures and above. The selected initial print speed reduction level in copies-per-minute (CPM) is applied only when printing starts (for approximately 15 to 20 seconds). This helps improve throughput if the fusing temperature can be kept constant. However, the throughput may decrease in an environment in which the temperature varies. • [Do not Reduce] Full speed. • [Reduce Level 1] 105