Ridgid WD1851 Owners Manual - Page 12
Blowing Feature - canada
View all Ridgid WD1851 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
SP6733-2 Ridgid WD1851 ES 2/3/12 2:04 PM Page 12 Operation (continued) Blowing Feature Your Vac features a blowing port. It can blow sawdust and other debris. Follow the steps below to use your Vac as a blower. ! WARNING: Always wear safety eyewear complying with ANSI Z87.1 (or in Canada, CSA Z94.3) before using as a blower. Dual-Flex Locking Hose ! WARNING: To reduce the risk of injury to bystanders, keep them clear of blowing debris. ! CAUTION: Wear a dust mask if blowing creates dust which might be inhaled. Extension Wand (Optional) ! CAUTION: To reduce the risk of hearing damage, wear ear protectors when using the Vac/Blower for extended time or in a noisy area. 1. Locate blowing port of your Vac. 2. Insert the locking end of the "DualFlex™ Locking" hose into the blowing port of the Vac. The hose should snap into place. To remove the hose from the Vac, press the release button in the hose assembly and pull the hose out of the Vac inlet. 3. (Optional) Attach extension wand to opposite end of hose, then place the car nozzle on the wand. 4. Turn Vac on and you are ready to use your Vac as a blower. Blowing Port Swivel End of Hose Car Nozzle (Optional) 12