Ridgid WD1851 Owners Manual - Page 7
Drum/Caddy Assembly
View all Ridgid WD1851 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
SP6733-2 Ridgid WD1851 ES 2/3/12 2:04 PM Page 7 Drum/Caddy Assembly If any parts are missing or damaged contact Customer Service. Do not assemble until you have all the parts. 1. Insert caddy left and caddy right into the bottom of drum as shown. Light taps with a mallet or hammer may be needed to fully seat both caddies. Drain 2. Install (4) #10 x 1-3/4" screws into matching holes on both right and left side of caddy, securing them to the bottom of the drum. Tighten screws until just snug. Do not over tighten as this may tend to deform the caddies. Caddy Right Caddy Left #10 x 1-3/4" Screw (4) Left Caddy Assembly Drain 3. Installing Cap Nut a. Place cap nut on end of axle. b. Tap gently with hammer until fully seated. c. Place wheel on the axle with smooth portion of wheel facing outward. Caddy Left Right Caddy Assembly Drain Open End Cap Nut Caddy Right Axle w/Wheel NOTE: Smooth side of the wheel to the outside. 7