Rocketfish RF-HTMF19 User Manual - Page 10
STEP 2 - Select screws, washers, and spacers, M8 × 25 mm screws
View all Rocketfish RF-HTMF19 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
STEP 2 - Select screws, washers, and spacers 1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware included. (If screws came with your TV, they are almost always in the holes on the back of your TV.) If you don't know the correct length of the mounting screws your TV requires, test various sizes by hand threading the screws. Select the screws that fit: M4 × 12 mm screws (01) M4 × 35 mm screws (01) M6 × 12 mm screws (01) M6 × 20 mm screws (01) M6 × 35 mm screws (01) M8 × 16 mm screws (01) M8 × 25 mm screws (01) M8 × 35 mm screws (01) M8 × 50 mm screws (01) Use the M4 washers (02) for M4 screws and M6/M8 washers (02) for all M6 or M8 screws. For an irregular or obstructed TV back, also use the 2.5 mm, 5 mm, or 22 mm spacers (03). CAUTION: To avoid potential personal injuries and property damage, make sure that the screws have adequate threads to secure the brackets to your TV. If you encounter resistance, stop immediately and contact customer service. Use the shortest screw and spacer combination to accommodate your TV. Using hardware that is too long may damage your TV. However, using a screw that is too short may cause your TV to fall from the mount. Screw fits correctly Screw is too long Screw is too short 2 Remove the screws. 10