Rocketfish RF-HTMF19 User Manual - Page 15
Drill two pilot holes through the mounting template to a depth of 2 3/4 in.
View all Rocketfish RF-HTMF19 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
RF-HTMF19 2 Align the center of the mounting template (07) at the height you determined in the previous step and make sure that it is level. Tape the mounting template to the wall. 3 Drill two pilot holes through the mounting template to a depth of 2 3/4 in. (70 mm) using a 7/32 in. (5.5 mm) diameter drill bit, then remove the mounting template. (69 mm) (257.3/5/34m2inim.n(7)0 mm) 7/32 in. (5.5 mm) 4 Move the cover out away from the arm assembly wall plate. 08 15
15
RF-HTMF19
2
Align the center of the mounting template (
07
) at the height you determined in
the previous step and make sure that it is level. Tape the mounting template to
the wall.
3
Drill two pilot holes through the mounting template to a depth of 2 3/4 in.
(70 mm) using a 7/32 in. (5.5 mm) diameter drill bit, then remove the mounting
template.
4
Move the cover out away from the arm assembly wall plate.
(69 mm)
7/32 in
(5.5 mm)
7/32 in. (5.5 mm)
2 3/4 in. (70 mm)
08