Rocketfish RF-HTMF19 User Manual - Page 17

STEP 6 - Option 2: Install on a solid concrete or concrete block wall, STEP 6

Get Rocketfish RF-HTMF19 PDF manuals and user guides View all Rocketfish RF-HTMF19 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

RF-HTMF19 STEP 6 - Option 2: Install on a solid concrete or concrete block wall CAUTION: To prevent property damage or personal injury, never drill into the mortar between the blocks. Mount the wall plate directly onto the concrete surface. 1 Align the center of the mounting template (07) at the height you determined in the previous step and make sure that it is level. Tape the mounting template to the wall, then drill pilot holes to a depth of 3 in. (76 mm) using a 3/8 in. (10 mm) diameter masonry drill bit, then remove the mounting template. Note: Mount the TV arm assembly (08) directly onto the concrete surface (no wall covering). Minimum solid concrete thickness: 8 in. (20.3 cm). Minimum concrete block size: 8 × 8 × 16 in. (20.3 × 20.3 × 40.6 cm). 3 in. (76 mm) 3/8 in (10 mm) You'll need Level 07 Mounting template 08 TV arm assembly Hammer 09 Lag screw (2) 10 Washer (2) C1 Concrete anchors (2) 3/8" masonry drill bit Drill Tape 1/2" socket wrench Note: The Concrete Installation Kit (CMK1) is not included. Contact Customer Service to request it. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
17
RF-HTMF19
STEP 6 -
Option 2: Install on a solid concrete or concrete
block wall
CAUTION
: To prevent property damage or personal injury, never drill into the mortar between
the blocks. Mount the wall plate directly onto the concrete surface.
1
Align the center of the mounting template (
07
) at the height you determined in
the previous step and make sure that it is level. Tape the mounting template to
the wall, then drill pilot holes to a depth of 3 in. (76 mm) using a 3/8 in. (10 mm)
diameter masonry drill bit, then remove the mounting template.
Note:
Mount the TV arm assembly (
08
) directly onto the concrete surface (no wall
covering).
Minimum solid concrete thickness: 8 in. (20.3 cm).
Minimum concrete block size: 8 × 8 × 16 in. (20.3 × 20.3 × 40.6 cm).
You’ll need
3/8 in (10 mm)
3 in. (76 mm)
Hammer
C1
Concrete
anchors (2)
09
Lag screw (2)
Drill
3/8" masonry
drill bit
1/2" socket
wrench
07
Mounting
template
Tape
08
TV arm assembly
Level
10
Washer (2)
Note
: The Concrete Installation Kit
(CMK1) is not included. Contact
Customer Service to request it.