Ryobi P5452BTL Operation Manual - Page 25
Transporting And Storing, Warning
View all Ryobi P5452BTL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
MAINTENANCE helps keep the chain away from abrasive surfaces, such as the ground. Keep it on the right hand side of the bar where it will be between the chain and the ground during flush with ground cutting. The mounting screw requires a 5/16 in. wrench (or adjustable wrench) to achieve the recommended torque of 35 to 45 in-lb. A torque within this range can be achieved by using the following method. n Tighten the screw with wrench until snug. n From the snug position, tighten the screw an additional 3/4 of a turn using a wrench. TRANSPORTING AND STORING See Figure 35. WARNING: Always remove the battery pack before transporting or storing chain saw. Place battery pack indoors in a dry, secure location out of the reach of children when storing. Failure to follow these instructions may lead to accidental starting or unauthorized use and result in serious personal injury. Do not store or transport the chain saw when it is running. The chain saw should always be idle before storing or transporting. Always place the guide bar scabbard on the bar and chain before storing or transporting the chain saw. Use caution to avoid the sharp teeth of the chain. Clean the chain saw thoroughly before storing. Store the chain saw indoors, in a dry place that is locked and/or inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts. MOUNTING SCREW TIGHTEN 3/4 OF A TURN SAFE-T-TIP™ Fig. 33 Fig. 34 Fig. 35 25 - English