Ryobi TS1346 Operation Manual - Page 10
Blade Wrench / Storage Area, Carrying Handle, Miter Lock Handle, Spindle Lock Button, Trigger Lock
View all Ryobi TS1346 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
FEATURES BLADE WRENCH / STORAGE AREA See Figure 2. A blade wrench is packed with your saw. One end of the wrench is a phillips screwdriver and the other end is a 1/4 in. (6.4 mm) hex key. Use the hex key end when installing or removing blade and the phillips end when removing or loosening screws. A storage area for the blade wrench is located behind the fence. CARRYING HANDLE See Figure 3. For convenience when carrying or transporting your miter saw from one place to another, a carrying handle has been provided on top of the saw arm as shown in figure 3. To transport, turn off and unplug your saw, then lower the saw arm and lock it in the down position. Lock saw arm by depressing the lock pin. MITER LOCK HANDLE See Figure 3. The miter lock handle securely locks your saw at desired miter angles. SPINDLE LOCK BUTTON See Figure 4. A spindle lock button has been provided for locking the spindle which keeps the blade in your saw from rotating. Depress and hold the lock button while installing, changing, or removing blade only. SWITCH TRIGGER SWITCH TRIGGER SPINDLE LOCK BUTTON Fig. 4 SAW ARM LOCK PIN CARRYING HANDLE PADLOCK Fig. 5 MITER LOCK HANDLE SAW ARM LOCKED IN DOWN POSITION TRIGGER LOCK See Figure 5. To prevent unauthorized use of your compound miter saw, we suggest that you disconnect it from the power supply and lock the switch in the off position. To lock the switch, install a padlock (not included) through the hole in the switch trigger. A lock with a long shackle up to 19/64 in. (7 mm) diameter may be used. When the lock is installed and locked, the switch is inoperable. Store the padlock key in another location. Fig. 3 Page 10