Ryobi TS1346 Operation Manual - Page 9
Features
View all Ryobi TS1346 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
FEATURES KNOW YOUR COMPOUND MITER SAW See Figure 2. Before attempting to use your saw, familiarize yourself with all operating Features and Rules for Safe Operation. WARNING: Do not allow familiarity with your saw to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. 15 AMP MOTOR Your saw has a powerful 15 amp motor with sufficient power to handle tough cutting jobs. It is made with all ball bearings. 10 in. BLADE A 10 in. (254 mm) saw blade is included with your compound miter saw. It is fine for most wood cutting operations, but for fine joinery cuts or cutting plastic, use one of the accessory blades available from your nearest dealer. CUTTING CAPACITIES When the miter angle (miter table) is set at 0°: Maximum dimensional lumber sizes: 4 x 4 2 x 6 When the miter angle (miter table) is set at 45°: Maximum dimensional lumber size: 2 x 4 UPPER BLADE GUARD DUST GUIDE SAW ARM SWITCH TRIGGER LOWER BLADE GUARD BEVEL LOCK KNOB BEVEL SCALE MITER FENCE MITER TABLE "NO HANDS ZONE" LABEL "NO HANDS ZONE" BOUNDARY LINE MITER SCALE MITER TABLE FRAME CONTROL ARM MITER LOCK HANDLE POSITIVE STOP(S) ZERO CLEARANCE THROAT PLATE MITER LOCK PLATE Page 9 Fig. 2