Ryobi TS1355LA English Manual - Page 16
Adjustable Table, Table Extensions, Stop Block
View all Ryobi TS1355LA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ASSEMBLY ADJUSTABLE TABLE See Figure 12. The adjustable table can be used on either the left or right side of the miter saw. To install: Slide the adjustable table on either table extension, then insert the table extensions into the saw base. Use the lock screw to secure the adjustable table to the table extension. Tighten lock screw securely. TABLE EXTENSIONS See Figures 12 - 14. To use the stop block and/or adjustable table, slide on the desired table extension. To install table extensions, insert the ends of extensions into the holes in the sides of the base. Adjust the extensions to the desired length. Secure extensions in place by positioning a clamp bracket under each table extension beneath the miter table. Orient each clamp bracket as shown in figure 14. Secure each clamp bracket in place with a clamp bracket screw. The clamp bracket screw threads through the clamp bracket and tightens against bracket support on bottom of miter table, securing clamp bracket against table extension. STOP BLOCK See Figures 12 and 15. The stop block is included with the table extensions and is useful as a stop for making repetitive cuts to the same length. It can be installed on either side of the saw base: Slide the stop block on the back arm of either table extension, then insert the table extensions into the saw base. Use the small wing screw to secure the stop block to the table extensions. � Loosen the small wing screw and adjust the stop block the desired distance from the blade for the cut to be made. For accurate placement of the stop block, measure the distance from the teeth set on the blade to the stop block. � Tighten wing screw securely. � Plug the saw in. � Make a test cut in scrap material and measure the length of the workpiece. � Make any necessary adjustments. ADJUSTABLE TABLE SMALL WING SCREW STOP BLOCK TABLE EXTENSION CLAMP BRACKET BASE CLAMP BRACKET SCREW Fig. 12 16 TABLE EXTENSION MITER SAW BASE SAW VIEWED FROM BOTTOM MITER SAW BASE Fig. 13 BRACKET SUPPORT CLAMP BRACKET ASSEMBLED Fig. 14 STOP BLOCK Fig. 15