Ryobi TSS101L English Manual - Page 11
Know Your Compound Miter Saw - 13 amp 10 sliding compound miter saw
View all Ryobi TSS101L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
FEATURES KNOW YOUR COMPOUND MITER SAW See Figure 2. The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. 10 in. BLADE A 10 in. blade is included with the compound miter saw. It will cut materials up to 2 in. thick or 6 in. wide, depending upon the angle at which the cut is being made. 13 AMP MOTOR The saw has a powerful 13 amp motor with sufficient power to handle tough cutting jobs. It is made with all ball bearings, and has externally accessible brushes for ease of servicing. BEVEL LOCK lever The bevel lock lever securely locks your compound miter saw at desired bevel angles. The bevel lock lever is spring loaded and is released by pulling the lever away from the saw housing and ratcheting the lever. Carrying Handle See Figure 3. For convenience when carrying or transporting the miter saw from one place to another, a carrying handle has been provided on top of the saw arm. To transport, turn off and unplug the saw, then lower the saw arm and lock it in the down position by pulling the lock pin away from the saw housing and rotating it until it clicks into the slot. ELECTRIC BRAKE An electric brake has been provided to quickly stop blade rotation after the switch is released. LASER GUIDE For more accurate cuts, a laser guide is included with the miter saw. When used properly, the laser guide makes accurate, precision cutting simple and easy. MITER FENCE The miter fence on the compound miter saw has been provided to hold your workpiece securely against when making all cuts. The left side is larger providing additional support. MITER LOCK HANDLE See Figure 2. The miter lock handle securely locks the saw at desired miter angles. MITER SCALE The miter scale has index points provided at 0°, 15°, 22.5°, 31.6°, 45°, and 60.° POSITIVE STOPS ON MITER TABLE Positive stops have been provided at 0°, 15°, 22.5°, 30°, and 45° on both the left and right side of the miter table. SELF-RETRACTING LOWER BLADE GUARD The lower blade guard is made of shock-resistant, see-through plastic that provides protection from each side of the blade. It retracts over the upper blade guard as the saw is lowered into the workpiece. slide bar When unlocked, the saw arm will glide forward and backward the length of the slide bar for cutting various workpiece widths. Carrying Handle Saw Arm Lock Pin mITER LOCK HANDLE Saw arm Locked in Down Position Fig. 3 11